Black Paint for Fireplace Interior – I liked the look and it was super easy to maintain. But with the cold winter coming, my husband and I decided we had to run our chimney so we could enjoy hot fires all season.
So my first goal was to have our chimney inspected and cleaned. We called a reputable company, they came out in September and in less than an hour our fireplace was up and running! After all the research I’ve done, it’s advisable to always use a professional to sweep your chimney. This is really not a DIY project that everyone should tackle.
I did some research and opted for a high-temperature aerosol color. (Anecdote: You can’t buy aerosol paint in the city of Chicago, so I always shop online or take spray paint during my visits to the suburbs!) Junkie), and patiently waiting for his arrival.
When painting the interior of your home, it’s important to consider a variety of factors. Painting the interior of your fireplace requires intensive cleaning to prepare the surface. If you’re planning to light fires in your home, you’ll need to use a specially formulated color to withstand high temperatures. Most of these colors can withstand temperatures up to 1200 degrees. This, too, offers a chance that the paint will peel off and crack after about a year.
If you don’t plan to light a fire in your home, you can use a latex color, though some people prefer the finish of an oil-based color. A chimney is an important part of the interior of each house. So think of the colour of the colour that surrounds not only the chimney, but also the whole room.
Remove all switchboards and wall parts. Dry the walls thoroughly and grind them if you paint on a semi-glossy or glossy finish. Mask anything you want to protect with tape, including baseboards, moldings, wall fasteners, etc. Your first coat should be primed with the last color of your target mantle. You can also buy paint with a primer. This type of color can work well in certain situations, but you need to figure it out from your paint supplier. Wait 24 hours between levels before applying a second or third shift.
To paint the inside of a fireplace properly, you need to clean it thoroughly. Remove all ashes from the stove. Wear protective gloves and glasses, then use a rigid steel brush to clean the interior with trisodium phosphate, or TSP. You may need to wash the inside of the fireplace several times with TSP. Clean the inside of the fireplace with a clean, damp cloth to remove any TSP residue. Let the inside of the chimney dry completely.
Use tape to hide the fireplace and other areas you don’t want to paint. If you paint on metal, you need to apply a coat of primer to galvanize. For bricks or metal, you should use a high-temperature color for your finishing coats if you want to enjoy a fire in the fireplace. You can also use a high-temperature spray paint for barbecues, but be sure to check the manufacturer’s recommendations, regardless of the type of paint you buy.
Work in a well-ventilated room and wear a mask. Leave the first layer to dry for 24 hours, then apply a second layer if the first layer is not sufficiently covered. Once the paint is dry, remove the mask band. Some people install small wood-burning stoves or simply candles in painted fireplaces to avoid a fire right on the paint.
I originally tiled the two inner brick sides hitting the marble edge, but they don’t look okay. So I removed the tiles and removed the mortar. Finally, I was content to paint these two edges with ordinary trim and think I should find a solution in the long run because the paint would certainly be yellow because of the smoke, but in reality it’s always so white and clean. I like the fact that the colour doesn’t really draw attention to itself, and since it doesn’t come into contact with the heat, I’m not afraid it removes the toxins.