How Much Interior Paint do i Need – Before you start painting the interior walls, ceilings, woodwork, doors or windows of your home, you need to estimate the amount of paint you will use. Estimates require specific calculations for each area to be painted.
To estimate the amount of color, you need to cover the walls of a room, add up the length of all the walls, then multiply the number by the height of the room, from floor to ceiling. The number obtained is the square footage of the room. Is this math course coming back to you now?
Now you have to determine how much of this area can be painted. If you use a different color on the doors and windows, peel these areas off the room total. No sweat, just subtract 20 square feet for each door and 15 square feet for every medium-sized window in the room. You end up with a figure near the surface of the wall, which you have to cover with paint.
Let us now move on to the crucial problem of calculation. Divide the surface of the wall to be painted with 350 (the square foot cover of each gallon) to find the number of gallons of paint you need for the walls. You can circumnavigate uneven numbers; If the rest is less than 0.5, order a few litres of wall paint with the gallons; If the rest is greater than 0.5, order an extra gallon. Of course, bulk buying is usually more economical; So you will find that 3 liters of paint cost at least one gallon.
A vintage library room has been selected here that has experienced better days. Yes, you can scratch the finish and keep the wood, but it’s much more tedious than using chalk paint.
Because the remaining natural wood has a beautiful reddish color, the chosen color is a darker blue (if infested later, the red will appear in places by making a nice contrast). The painting used here is Napoleon’s blue chalk painting Annie Sloan.
The chalk painting Annie Sloan sold in pints and pints is the original and always the most popular chalk painting on the market. You can buy chalk painting in some craft and leisure shops, online or in your vintage/antique/local recycling store. You can also make your own chalk painting with some simple ingredients.
Note that there is also a wax pot and wax brush (for later use), sandpaper (for later use), a simple chip brush (no fancy brush needed for painting), a cloth or towel not fluffy work) and a Piece of aluminum foil to wrap your wet brush (if you take a break and don’t let your brush dry).
This is the true beauty of chalk painting. You don’t have to be careful that all brushstrokes go in the same direction; You don’t have to make sure the coverage is uniform; You don’t even have to paint every angle if you don’t want to.
For this particular piece, two layers are needed on the tabletop because the existing finish has already disappeared. Unfinished wood requires more paint to cover it. Make sure you use fine sandpaper from the handle. The rougher the sandpaper, the deeper the grooves created in the furniture. You don’t try to grind the wood (in general), just the finish under that coat of paint.
Where and how much color you sand is strictly a personal preference. If you’re crazy and sand too much, don’t worry. You can go back and forth and paint another layer of paint. There is no grinding in the middle of the tip where the existing surface was already missing.