How to Paint Interior Woodwork – If you used to resort to oily white paint on your home’s carpentry, it would fade over the years, sometimes in just a few months, especially in parts lit little or not by natural light. Wooden paints based on oil lacquer have other drawbacks, such as: Feeling, slow feeling (especially when it’s cold), prone to flow and drops (though there are no drip versions) and hard to clean.
When used correctly, an oil-based wood paint can provide a good surface, but as it stays long moist and sticky, the finish can easily be smears by a person rubbing it, or by the insects. Stick to it, for example. White-water-based wood paints don’t bleach, yellow and drip, even if they are less resistant than oil paints.
They also dry quickly and although you need to apply multiple layers of white, especially on bare wood or MDF, the color becomes easier and faster with the more layers you make, so you finish working in a day, which is usually the case. t the case with oil-based.
The other colors typically require only two or three layers, which makes them work significantly less than white water-based ones. The problem with some wood-based paints is that they dry so fast that it’s difficult to get a good surface. Returning to an area that has already started drying, the finish can be damaged. The best whitewater wood paint I’ve used is Dulux Trade Satinwood quick drying.
Although it can drip, it dries more slowly than most similar products. So it’s much easier to get a good finish. It’s a bit brighter than many satinwoods, but more importantly it’s better covered and more resilient. If you’re skeptical about the wood-based colors of the water, try this one.
A layer of wood primer forms a adhesive surface on which the paint can be glued. Allow to dry. Then apply a thin layer of insinuation to avoid a drop. Work with wood grain to get a smooth surface. On bare wood, two layers are usually enough.
The finished layer, whether shiny, satin or uphill, adds texture rather than colour, so a third layer base for full coverage if necessary. You can also use combined undercoating colors for the lower layers-you need three or four layers.
Remove or protect the furniture and cover with a dustproof cloth. When working on a baseboard, wrap mask tape on the edges of the mat or flooring. Always follow the manufacturer’s instructions on products or tools and, if any, wear appropriate clothing, masks and glasses.