Textured Paints for Interior Walls – When someone speaks of textured paint, you can think of the popcorn ceilings or the bumpy walls of 80 years in a “playroom ” style room. And while these are certainly types of textured paint, it could be argued that they give support a bad name.
The textured paint can help mask damage to walls if you are unable to carry out a new drywall installation. It can also be used to produce a wide range of Faux surfaces, from concrete to plaster. If your style is similar to farm chic, you can give a second look at textured paint. “We definitely see people trying to create a rustic and relaxed atmosphere in their homeland by adding texture ,” says Sarah Fishburne, head of trends and design at home depot.
“Adding textures can mask some imperfections on the walls ,” Fishburne says. Imagine you went into an old house and maybe your drywall isn’t really perfect. Instead of lowering it, you might want to add it a texture treatment to give it that kind of rustic look. ”
There are many ways to add texture to your walls. One option is to use an additive mixed with the paint and applied to the walls. These textures are pre-measured and ready to be added to a gallon of color. Silica sand can also be mixed with color to add different effects depending on the amount.
There are also textures applied directly to the wall. Fishburne recommends the role structure of Homas. “You can basically apply it with a brush and create patterns with a cavities ,” she says. “You can really play with it. We find that’s becoming more popular when people want to be a little more rustic or have a more casual look.
Once you’ve applied and dried, you can paint on it. ” Another option is to apply a joint mass to the walls with a knife or roller and use sponges or drums to create a texture. Fischburne advises Tinkerern to take a test before attacking the entire wall.
Just as I would recommend people using paint testers to make sure they get the right color in the room, I would really suggest getting a piece of drywall, or a few pieces of drywall, and really experimenting with the technique, From the way you want to do it, you don’t want to experiment while applying it to the actual wall.
Now hold him around the room and see. Is it getting crowded? You don’t have to texture the whole room. It could be an area, it might just be a blanket. So you can also change the size of the project you want to do. ” The application varies depending on whether you use a color with an addition or a texture mass. Follow the manufacturer’s instructions and collect all the necessary tools, such as rolls, drums, sponges and brushes.
Fishburne recommends working in small areas of about two feet. “You want to make sure you’re done with the [texture] before it dries, and it doesn’t harden, because that’s it, ” she said. You also want to make sure you give yourself enough time to approach the project in one day.
“It’s very hard to go back and mix ,” Fishburne says. “You don’t want to have some kind of chessboard on the wall because you stopped and you started. Again, you want to make sure you’ve done all your research, that you have all your products and that you really want it to be something you start and finish in a day so you have a really nice look and C have Ohérent all over the house.
The textured color is not without pitfalls. “One of the problems is that it’s harder to correct imperfections and mistakes ,” Fishburne says. “If someone hits in and it cracks or tears, you have to go back and fix the whole section. It’s more maintenance than an ordinary painting.
Fischburne also notes that this is a more lengthy project than your usual painting work. “It takes a lot of time, because you have to do some research beforehand and see which applicators you need, because most of them need some kind of roller, some kind of brush and similar parts ,” she explains.